Table of Contents
Advertisement
When creating data log pages, there will be set limits from the page, which was saved
before.
4.4.3.4 Data log page erasing
To erase a data log page, select the required page and press F2. The confirmation
request dialog will appear. To cancel erasing, press F2. To confirm erasing of the selected
page, press F1. To confirm erasing of all the pages, press F3.
4.4.3.5 Data log page creating
To create a new data log page, select the required page and press F3. Channel plan
selection screen will open. Press
Press
. The screen will display the data log page table with initial values (Figure 4.4.7).
Then you can perform all the operations described in Section 4.4.3.3: measuring, checking
against a limit plan and saving the page into memory.
4.5 Setup
The
icon in the Service menu refers to this mode. The setup mode allows you to
modify the general parameters of the Analyzer. The screen view is represented in the
Figure 4.5.1.
Choose parameter for editing with
keys.
The table represents the following settings:
a) Ch plan. Select channel plan from the available (Section 4.4.2). If a channel plan is
not selected, ch template will be displayed;
b) Language. Select language. Available settings: English;
c) Unit. Select measurement units for the signal level. Available settings: dB V,
dBmV, dBm;
d) Contrast. Set LCD contrast from 0 to 100%;
e) Display. Select display mode. Available settings: normal – white characters in the
blue background; revers – blue characters in white background;
f) Sound. Select key pressing sound. Available settings: off – silent; type1, type2,
type3 – three types of sound;
g) Power off. switches power off automatically after 5 or 15 minutes with no keys
pressed. Available settings: off, 5 min, or 15 min
h) Beeping. an audible indication of signal level measured. Available settings: on, off;
i) Ch template. Select channel template from the list.
24
and
–only active when battery powered;
keys to select the channel plan to be measured.
Figure 4.5.1
or
keys. Then scroll parameter with ◄ and ►
Advertisement
Table of Contents
