Configuration - ABB REM 543 Technical Reference Manual

ABB Network Partner
3.3.
Page 10
REM 543 Protection,
Monitoring and Control

Configuration

The REM 543 machine terminals are adapted to specific applications by using the Relay
Configuration Tool included in the CAP 505 Tool Box. The tool is used for configuring
the basic terminal, protection and logic function blocks, control and measurement func-
tions, timers and other functional elements included in a logic functions library (refer to
section "Relay configuration").
The MIMIC picture, alarm texts and LED indicators are configured with the Relay
Mimic Editor (refer to section "MIMIC configuration").
The configuration of LON network is described in section "LON network configura-
tion". If LON communication is used without LON inputs and outputs (network varia-
bles), the section about LON network configuration is unnecessary.
The configuration procedure starts by configuring the functions of protection, control,
condition monitoring, measurement and logics.
For more detailed information about the configuration, refer to the tool-specific manu-
als and the manual "Configuration Guideline" for RE_ 54_.
Technical Reference Manual
Part 1, General