ABB REM 543 Technical Reference Manual page 50

ABB Network Partner
Page 50
REM 543 Protection,
Monitoring and Control
Dry cold test
Damp heat test cyclic
Storage temperature tests
Table 7: Standard tests
Insulation tests Dielectric test
(IEC 60-2; BS 932: Part
2 and IEC 255-5; BS
5992: Part 3)
Impulse voltage test
(IEC 255-5)
Insulation resistance
measurements
(IEC 255-5)
Mechanical tests Vibration tests (sinusoidal)
Shock and bump test
Table 8: Electromagnetic compatibility tests
The EMC immunity test level fulfills the requirements specified in the generic standard EN 50082-2
1 MHz burst disturbance test,
class III (IEC 255-22-1)
Electrostatic discharge test, class
III (IEC 61000-4-2)
Radio frequency interference test
Fast transient disturbance test
(IEC 255-22-4 and IEC 61000-4-
4)
Surge immunity test
(IEC 61000-4-5)
Electromagnetic emission tests
(EN 55011 and EN 50081-2)
CE approval
Technical Reference Manual
Test voltage
Test voltage
Insulation resistance
common mode
differential mode
for conduct discharge
for air discharge
conducted, common mode
(IEC 61000-4-6)
radiated, amplitude-modulated
(IEC 61000-4-3)
radiated, pulse-modulated
(ENV 50204)
radiated, test with a portable
transmitter
(IEC 255-22-3, method C)
ac/dc ports
signal contacts
power supply, ac/dc ports
I/O ports
conducted RF emission (mains
terminal)
radiated RF emission
Complies with the EMC directive 89/336/EEC and the LV directive 73/
23/EEC
Part 1, General
according to IEC 68-2-1
(BS 2011: Part 2.1 A)
according to IEC 68-2-30
(BS 2011: Part 2.1 Db),
r.h. = 95%, T = 20°...55°C
according to IEC 68-2-48
2 kV, 50 Hz, 1 min.
5 kV, unipolar impulses,
waveform 1,2/50 µs,
source energy 0.5 J
> 100 MΩ, 500 V dc
IEC 255-21-1, class I
IEC 255-21-2, class I
2.5 kV
1.0 kV
6 kV
8 kV
10 V (rms), f = 150 kHz...80 MHz
10 V/m (rms),
f = 80...1000 MHz
10 V/m, f = 900 MHz
f = 77.2 MHz, P = 6 W;
f = 172.25 MHz, P = 5 W
4 kV
2 kV
4 kV, common mode
2 kV, differential mode
2 kV, common mode
1 kV, differential mode
EN 55011, class A
EN 55011, class A