ABB REM 543 Technical Reference Manual page 64

ABB Network Partner
Page 64
REM 543 Protection,
Monitoring and Control
Service Report for REM 543
Name of the station/project ___________________________________________________
(Fill in this form. Use one form per relay.)
Date & Time_______________________
Relay information (from the
MMI menu)
MAIN MENU/Status/General
IRF code _________________
(Before reset)
_________________
(After reset)
Status _________________
MAIN MENU/Information/Identi-
fication
Hardware No _________________
Software No _________________
Serial No _________________
Final test date _________________
MAIN MENU/Information/CPU1
SW build _________________
SW revision _________________
Serial No _________________
MAIN MENU/Configuration/
General
Config counter ________________
Important! Read the information before reset and pay attention to whether the
IRF code changes after reset.
Technical Reference Manual
Configuration
Made by
Company
Reference
(Filename, version number,
etc.)
Configuration date
(Downloaded to the relay)
Environment
MicroSCADA version
Protocol (SPA, LON,...)
Bay No. or place
Aux. voltage (power sup.)
Binary I/O aux. voltage
Version of relay tools
Contact information
Handled by
Company
Part 1, General
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________