Connecting To A Dc Power Supply - Omron ZR-RX45 User Manual

Connecting to a DC Power Supply

Use the optional DC cable (ZR-XRD1).
Important
Use a power supply within the 8.5 to 26.4 VDC range.
1
Configure the tip of the DC cable (ZR-XRD1) to enable it to be connected to the DC power supply.
2
Connect the DC output side to the power supply connector on the ZR-RX45.
3
Connect the DC input side to the DC power supply.
Important
Be sure to check the polarity of the wire tips when performing wiring.
4
Press the power switch on the ZR-RX45 to the ON side to turn on the power.
ZR-RX45 User's Manual
DC cable
(ZR-XRD1: Option)
Connecting the Power Cable and Turning on the Power
Shielded lead (- side)
White (+ side)
27