Start/Stop (Usb Drive Mode) - Omron ZR-RX45 User Manual

(9) START/STOP (USB Drive Mode)

USB Drive Mode Operation Procedure
In USB Drive Mode, the internal memory is recognized by the PC as an external storage media.
Since the internal memory is recognized as a removal disk, this mode facilitates file manipulation such as
transfer and deletion.
1
Use a USB cable to connect the ZR-RX45 and a PC.
2
While pressing the ZR-RX45 START/STOP key, turn the power ON.
3
The external storage media is recognized by the PC and data exchange becomes possible.
* In USB Drive Mode, the display on the ZR-RX45 becomes as follows:
Important
• To exit USB Drive Mode, turn off and on the power again.
• In USB Drive Mode, no operation including data capture and data replay is available.
• To use USB Drive Mode, a USB driver must be installed in your PC.
Please refer to "Installing the USB Driver" in the "PC Software Manual".
62
Key Operation
This key performs the following two operations:
<Starts/stops capture>
• During Free Running, starts capture.
• During capture, stops capture.
ZR-RX45 User's Manual