To Mount; Mounting The Extension Terminal Base Set (Zr-Xre1) - Omron ZR-RX45 User Manual

Mounting the Extension Terminal Base Set (ZR-XRE1)

Mount the extension terminal base set as shown below.
Important
Make sure the ZR-RX45's power is OFF when mounting the extension terminals.
Set Contents
Extension Terminal Base Unit : 1

To Mount

1
Remove the terminal unit mounted to the ZR-RX45 (refer to 39).
2
Insert the tabs at the top of the terminal unit into the slots of the extension terminal base unit,
and push in the unit until the lock tabs at the bottom of the unit are securely locked.
(1) Insert tabs at the top of the terminal unit into
the slots of the extension terminal base unit.
3
Connect the extension terminal cable to the extension terminal base unit.
* Press in the cable until it is securely locked.
ZR-RX45 User's Manual
Extension Terminal Cable : 1
(2) Press the unit in the direction shown until it is
securely locked.
Extension terminal cable
Mounting the Extension Terminal Base Set (ZR-XRE1)
41