Table of Contents
Advertisement
Window names and functions
18. Data capture bar
17. Upper limit scale
16. Waveform display
15. Lower limit scale
1. Simplified message display
Displays the operation status of the ZR-RX45.
Backup Failed
*
Refer to page 88 for details on the data capture such as a trigger and repeat.
*
Refer to page 82 for details on the memory used for capture.
52
Window names and functions
1. Simplified message display
14. File name display
: Appears in the start up status or when data is not being captured.
: Appears while waiting for trigger generation after measurement is started.
*: Appears when data is being captured in the internal memory.
*: Appears when data is being captured in the USB memory.
*: Capture stop processing or other cases when data is being written to the built-in internal
memory or USB memory
: Appears when the ZR-RX45 waits for you to press the Start/Stop key to stop it after data
capture.
: Appears while the data in the internal memory is being replayed.
: Appears while the data in the USB memory is being replayed.
: Appears when backup fails (e.g. when the USB memory specified as the backup
destination has been removed).
: Appears when a demo waveform is being displayed, not measurement data.
4. Internal memory access display
5. USB memory access display
3. Status mark
6. Remote display
7. Key lock display
2. TIME/DIV
8. Clock display
13. Pen display
9. AC/battery status display
10. Digital display
11. Quick settings
12. Alarm display
ZR-RX45 User's Manual
Advertisement
Table of Contents
