Data Replay Menu - Omron ZR-RX45 User Manual

(10) Data replay menu

Data replay menus are displayed by pressing the MENU key during replay.
Cursor Position
Data search
Statistical calculation
between cursors
112
Setting Menus
Setting
Move to First Data
Move to Last Data
Move to Center
Move to Method:
Selected Position
[Position] Position
[Time]
Cursor Synch
CH
[CH1 to CH200]
[Logic]
[Pulse]
[Alarm]
Mode [CH1 to CH200]
[Logic]
[Pulse]
[Alarm]
Level [CH1 to CH200]
Find Next
Find Previous
Function
Execute
Selections available
Press right key to execute.
Press right key to execute.
Press right key to execute.
Position, Time
0 to end of data
For example, if the sampling interval is 100 ms,
capture destination is the built-in RAM, and the
number of capture points is 10000, settings up to
9999 ms are available.
Date Date from the start to end of the data
Time Time from the start to end of the data
Off, On
CH1 to 200, Logic, Pulse, Alarm
* Logic and Pulse are displayed only if the Logic
Pulse function is On in the AMP settings.
CH1-200
Logic1-4
Pulse1-4
Alarm1-4
H, L
H, L
H, L
Both, H, L
Set numeric value
Set numeric value
Press right key to execute.
Press right key to execute.
Off, Average, Max, Min, Peak, RMS
Press right key to execute.
ZR-RX45 User's Manual