Table of Contents
Advertisement
(1) CH GROUP
MONITOR
(2) SPAN/TRACE/POSION
ZR-RX45 User's Manual
Press this key to switch to the next group consisting of 10 channels.
Press the
side to switch to the group consisting of the next 10 channels with a
smaller number.
Press the
side to switch to the group consisting of the next 10 channels with a
larger number.
Pressing this key can switch among the following items.
• Switch channels of the digital display area
• Switch channels of the AMP settings
• Switch channels of the trigger/alarm level settings
• Switch channels of the calculation display
1 to 10
11 to 20
AMP settings
Level settings
Switches the display in the digital display.
Used to change the settings related to waveform display during Free Running (when
stopped), data capture and data replay.
Pressing this key will switch displays as shown below.
MONITOR
Allows changing of the span
Displays digital values
value (waveform amplitude)
(default status)
▪ Channel change :
▪ Amplitude change :
▪ Change available
: Voltage 8 steps/Temperature
6 steps
* When ALL is set, setting values for CH1 is reflected on other channels.
When CH1 is OFF, ALL Cannot be set.
191 to 200
Digital + Calculation
Display screen
SPAN
POSITION
Allows changing of the position
(waveform up/down position)
▪ Range can be changed in
keys
keys
units of 10%
▪ Channel change :
▪ Position change :
▪ Change available
: 10% steps of range
Statistical calculation
between cursors
TRACE
Allows turning ON/OFF of the
waveform display
▪ Channel change :
keys
▪ Position change :
keys
▪ Change available : ON/OFF
keys
* Data is captured even if OFF
keys
is set.
Key Operation
59
Advertisement
Table of Contents
