Connection Procedures
Connecting the AC Adapter
Connect the output side of the AC adapter to the AC adapter connector.
Important
Be sure to use only the AC cable and the AC adapter provided as standard accessories.
Connecting the Grounding Cable
Grounding cable
Use a flatblade screwdriver to push in the button above the ground terminal while connecting the grounding
cable to the ZR-RX20. Connect the other end of the cable to ground.
Important
Connect the GND terminal for safe measurement. The ZR-RX20 must also be grounded when sharing a common
ground level with other devices.
Note
The grounding cable is not provided as a standard accessory and must be prepared separately.
[Recommended Cord Diameter: AWG18/UL1007]
ZR-RX20 Start Up Guide
Connection Procedures
15