ST STM32Cube Quick Start Manual page 33

• By clicking to the play button
•
start and stop an acquisition (to an SD card)
•
choose which tag classes will be used for the next acquisition (both HW and SW tags)
•
handle hardware and software data tagging and labelling of an ongoing acquisition
•
set up the acquisition name and description
• A YYYYMMDD_HH_MM_SS (i.e., 20200128_16_33_00) folder containing the raw data and the JSON
configuration file will be created into the SD card
Acquisition settings and control
you can switch to the acquisition settings and control tab to:
33