ST STM32Cube Quick Start Manual page 26

• DATALOG2 provides a Python example for real time control and plot
• hsdatalog_GUI.py works within the HSDPython_SDK, developed in Python 3.10 on Windows and Linux
environments.
•
HSDPython_SDK requires different Python modules, distributed together with FP-SNS-DATALOG2. By installing them through pip or apt-
get install command, all the required dependencies are automatically solved – see HSDPython_SDK to fully setup your Python
environment
• Once the board is connected via USB and the
Python environment has been properly updated,
you can launch the real time plot by just
executing hsdatalog_GUI.py available in
Utilities/HSDPython_SDK
• Click on Connect button to allow the connection
between the board and the PC
Execute hsdatalog_GUI.py
26