Precautions Before Disassembling - Epson SC-P600 Service Manual

SC-P600

1.1.3 Precautions before Disassembling

 Unlocking the carriage
Unlock the carriage by following the procedure below.
1. Remove the Rear Housing, Right Cover, and Right Decoration Plate.
2. Insert a phillips screwdriver into the hole of the frame on the right side of the printer, and rotate the white
shaft of the Ink System.
 Handling the Ink Supply Unit
In order to prevent ink leakage, be careful of the following when handling the Ink Supply Unit.
(See "Ink Supply Unit (p22)"

Unless otherwise specified in this manual, do not disassemble the Ink Supply Unit any further than specified as an
ASP. Otherwise, replace the Ink Supply Unit with a new one.

Be careful not to damage the film of the ink path.

When disassembling/reassembling the printer, be careful not to apply extra force on the joint part of the ink tube
and I/C Holder Unit, and on that of the ink tube and Ink Selector.
Disassembly/Reassembly
Table 1-1. Carriage Lock/Unlock
Direction of Rotation
Clockwise (CW)
Counterclockwise (CCW)
Right
Phillips screwdriver
Figure 1-1. Unlock the Carriage
and "CR Contact Module (p22)"
Carriage
Locked
Unlocked
CCW
CW
Hole
for details.)
Overview
SE Group Confidential (Related Staff Only)
Revision D
11