Epson SC-P600 Service Manual page 13

SC-P600
 Securing the CR Unit (tape length: 220
Secure the CR Unit with strong tape as follows.
1. Open the printer cover and move the CR Unit to its home position.
2. Attach the unfolded end of strong tape on the CR Unit, and pull the tape and apply it along the shapes of
the Upper Housing Assy to the right side of the printer to secure the CR Unit.
Disassembly/Reassembly
±
2 mm, tape width: 18 mm, fold one end by 5 mm)
CR Unit
Strong tape
Figure 1-5. Securing the CR Unit
Overview
Attach strong tape with
its unfolded end sticking
out of the printer.
SE Group Confidential (Related Staff Only)
Revision D
13