Table of Contents
Advertisement
SC-P600
Presumable Cause
The adjustment of the printer may be insufficient.
The media has deteriorated and discolored.
The media was stored in bad conditions and
damaged.
The color or contamination of the backing may be
interfering.
Wrong row/wrong measuring direction
Measuring at an angle
17. When the measurement of all the rows is complete, click the Completed button.
Adjustment
Table 2-9. Troubleshooting when the measurement fails
After the adjustments that must be done after parts replacement are all
complete, perform the measurement again.
Use new Ultra Premium Presentation Paper Matte Enhanced Matte Paper or
Archival Matte Paper.
When using the backing board: remove any contamination on the backing
board, and then stack two color charts over on each other and perform the
measurement.
Measurement without a backing board: Stack the color chart over on each
other on blank (white) Premium Glossy Photo Paper and perform the
measurement.
See
Figure 2-35
the measuring direction are correct.
Align the scale with the chart correctly again, and then slide the calibrator in
parallel to the row to be measured on the patches.
Figure 2-38. Color measurement completed
Details of Adjustments
Major Troubleshooting
and
Table 2-8
and confirm the current row to be measured and
Step 17
SE Group Confidential (Related Staff Only)
Revision D
67
Hide quick links:
Advertisement
Table of Contents
