Preparation Before Returning The Unit To The User - Epson SC-P600 Service Manual

SC-P600

1.1.4 Preparation before Returning the Unit to the User

When returning the printer to the user, make sure to secure the specified points with tapes to avoid damaging the
printer during transport.
 Attaching the front tray lock (tape length: 90
Attach the front tray lock (1535369) and secure it with strong tape as follows.
1. Attach the front tray lock on the position shown in
2. Attach the unfolded end of strong tape on the front tray lock as shown in
apply it along the shapes of the Upper Housing Support Assy to secure the front tray lock.
 Attaching the front tray support pad (tape length: 190mm, tape width: 18 mm, fold one end by 5 mm)
Attach the front tray support pad (5125513) and secure it with strong tape as follows.
1. Attach the strong tape to the front tray support pad shown in
2. Attach the front tray support pad to the front of the printer shown in
Attaching area
Disassembly/Reassembly
Figure 1-2. Attaching and Securing the Front Tray Lock
Upper of Pad
Figure 1-3. Attaching the strong tape to the front tray
Attach the unfolded end of tape
to the front of the printer.
Figure 1-4. Attaching the front tray support pad
±
2 mm, tape width: 18 mm, fold one end by 5 mm)
Figure 1-2.
Front tray lock
Figure
Lower of Pad
Overview
Figure 1-2, and pull the tape and
Strong tape
1-3.
Figure 1-4.
Tray Suppot Assy
The location of the projections of
pad is between roller and claw.
SE Group Confidential (Related Staff Only)
Revision D
Folded end
12