Fatal Error Code - Epson SC-P600 Service Manual

SC-P600

4.3 Fatal Error Code

This section describes the fatal error code and the possible cause for this product.
Error Error
type code
01H
DC motor
error (CR)
03H
05H
F1H
DC motor
error (PF)
F3H
F6H
Appendix
Table 4-2. Fatal Error List
Error name
• CR Encoder failure
• Motor driver failure
• Increase of CR load when printer is
PID excess load error
• Paper jam
• CR is collided to Front Tray Assy
• CR is collided to Upper Paper Guide
• CR Motor failure
• CR Scale stain
• CR Encoder failure
PID reverse error • Motor driver failure
• CR Belt failure
• CR Pully failure
• CR Encoder failure
PID speed degradation error
• Motor driver
• PF Encoder failure
• Motor driver failure
• Increase of PF load (CR Bush is weared,
PID excess load error
• Paper jam
• PF Motor failure
• PF Scale stain
• PF Encoder failure
PID reverse error
• Motor driver failure
• PF Belt failure
• Connection failure of the PF Motor or
Over current error
• PF irregular load
• PF Motor or PF Encoder failure.
Possible cause
printing (CR shaft is damaged, CR shaft
receiver is damaged, Grease is
consumed, DR layshaft is deformed)
Assy
CR grease is consumed, PF Roller
Center Support is deformed, CR is
collided to Front Tray Assy)
the PF Encoder.
Fatal Error Code
Suspect Parts
• CR Encoder
• CR FFC
• Main Board
• CR Shaft, CR Unit, Guide CR
• CR grease
• Remove Paper Jam
• Front Tray Assy
• Front Tray Sensor
• APG Assy
• Upper Paper Guide Assy
• CR Motor
• CR Scale
• CR Encoder Assy
• CR FFC
• Main Board
• CR Belt
• CR Pully
• CR Encoder
• CR FFC
• Main Board
• CR Motor
• Paper Jam
• PF Encoder
• Main Board
• Check PF Belt tension
• CR Shaft grease
• Check PF Roller Shaft Center Support
Position Adjustment
• PF Roller
• PF Encoder
• Paper Jam
• PF Motor
• Front Tray Assy
• Rear Guide Assy
• PF Scale
• PF Encoder
• PF Encoder FFC
• Main Board
• PF Belt
• PF Encoder
• PF Motor
SE Group Confidential (Related Staff Only)
Revision D
81