Eltek Valere PSR06-W User Manual page 2

Rectifier
PSR06-W
User Manual
Page 2 (24)
ATTENTION! Read this manual very carefully before installing and commissioning the specified module.
This manual is a part of the delivered module. Familiarity with the contents of this manual is required for installing
and operating the specified module.
The rules for prevention of accidents for the specific country and the general safety rules in accordance with IEC
364 must be observed.
The function description in this manual corresponds to the date of publishing.
Technical changes and changes in form and content can be made at any time by the manufacturer without notice.
There are no obligations to update the manual continually.
The module is manufactured in accordance with applicable DIN and VDE standards such as VDE 0106 (part 100) and
VDE 0100 (part 410). The CE marking on the module confirms compliance with EU standards 2006-95-EG (low volt-
age) and 89/339 EWG (electromagnetic compatibility) if the installation and operation instructions are followed.
Supplier:
Eltek Valere Deutschland GmbH
Industrial Division
Schillerstraße 16
D-32052 Herford
+ 49 (0) 5221 1708-210
FAX + 49 (0) 5221 1708-222
Email Info.industrial@eltekvalere.com
Internet http://www.eltekvalere.com
© Copyright ELTEK VALERE DEUTSCHLAND GmbH 2009. All rights reserved.
ELTEK VALERE DEUTSCHLAND ©2009 UM_PSR06-W_E_R1.1