Common Errors; Ix.warranty - Merax MS283457AAA User Manual

VII

.COMMON ERRORS:

l
ERRO CODE
A) signal wire not well connected
E01
B) signal wire broken
A) Over current protection
B) Motor burnt
E02
C) PCB burnt
D) Input voltage too low
E03 Over load protection
A) Sudden big current protection
E04
B) PCB burnt
A) Explosion-proof protection
E05
B) PCB burnt
C) Motor wire not well connected
E06 Motor wire not well connected or broken
--- Safety key off
A correct lubrication of the treadmill with silicon oil or Teflon is REALLY IMPORTANT. This lubrication MUST BE PERFORMED
REGULARLY DEPENDING ON EACH PERSON, EVEN BEFORE ITS FIRST USE.
You MUST preserve the original packaging with its protections, purchase receipt, manual and components during the

IX.WARRANTY

We have one year quality warranty to the products. Within the warranty period, we provide the
FREE replacement parts.
If caused by incorrect assembly, incorrect use or change of parts failures, our company takes no
responsibility.
You should show our products series no. and relative pictures or information before getting the
warranty.
This treadmill is only for home use, if the problems occurred by commercial used, our company
takes no responsibility.
REASON
Re-connect signal wire
Change new signal wire
Turn off machine and restart
Change new motor
Chang new PCB
Check input voltage
Turn off machine to have a rest and restart
Turn off machine and restart
Chang new PCB
Check input voltage
Chang new PCB
Re-connect motor wire
Re-connect or change new motor wire
Re-put safety key
guarantee period
HOW TO SOLVE
45