Recycling Inform - Merax MS283457AAA User Manual

Adjusting bolt
CLEANING: Don't use abrasive products. A damp cloth is enough.
LEVELING: If your unit is provided with leveling wheels, please adjust them in order to avoid
vibrations and therefore malfunctions.
KEEP THESE MAINTENANCE ADVICE FOR FUTURE REFERENCES
VII.RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled
after its useful life as required by law.
TIGHTEN THE BELT: (if the belt slips on the treadmill when walking).
Start treadmill and increase the speed to 3 km/h. Using the 5mm
Wrench, turn both bolts 1/4 clockwise. If the belt is properly tight to
walk, you must be able to pull up each side (at the edge) of the belt 5
to 7 cm off the platform. Be careful and maintain the belt aligned.
Repeat this procedure until the belt is properly tightened.
TIGHTEN THE DRIVE BELT: if the drive belt becomes loose after
using for a period of time, you need to:
(1) Open the motor cover.
(2) Use the 5mm wrench to turn the adjusting bolt clockwise.
Repeat this procedure until the drive belt is not slippery anymore.
if the running belt slips, use 5mm wrench,
turn both sides bolts 1/4 clockwise. Repeat
this procedure until the belt is properly
tightened.
44