Emerson CC200 Quick Start Manual

CC200 Expansion Module
Hardware and Wiring
Quick Start Guide
Overview
The CC200 Expansion Module is built with the necessary onboard IO to add additional IO for modular coil case designs or
multi-evaporator walk-in boxes.
• One TRIAC for control of PWM (pulse width modulation) EEV valve or one stepper motor control for EEPR stepper or EEV stepper.
• One digital input: user-configurable purposes.
• One pressure input for suction pressure transducer.
• Three color-coded temperature inputs for discharge air, return air, and defrost termination plus coil out temperature.
• Expansion port connector for easy connection to CC200 Main Controller.
Specifications
Power
Ambient Operating Temperature
Storage Temperature
Relative Humidity
Power Supply
Enclosure
Dimensions
Purpose of Control
Construction of Control
Rated Impulse Voltage
Pollution Degree
Over-voltage Category
Type of Action
Pulse Valve TRIAC
Unipolar Valve
Bipolar Valve
Document Part # 026-4715 Rev 6
©2022 Emerson Digital Cold Chain, Inc. This document may be photocopied for personal use.
Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
CC200
Powered From Expansion Port of CC200 Main Controller
14°F to 122°F (-10°C to 50°C)
-40°F to 185°F (-40°C to 85°C)
20-85% RH; non-condensing
24VDC, max 20W PELV (Class 2 Source)
Type: 4 DIN Rail Mountable Rating: UL 94V-0
110mm x 183mm (4 5/16" x 7 3/16")
Operating Control
DIN rail mounting control to be incorporated in Class I or Class II appliances
2500V
2
II
1.C
24/120/230VAC, 20W Max
12VDC, max 330mA/Phase (Class 2 circuit)
12VDC, max 800mA (Class 2 circuit)
CC200 Expansion Module
Page 1 of 2