Table of Contents
Advertisement
SAM and SIM1, SIM2 are identified by the engraved marks on the lower housing.
When introducing a SAM/SIM into slot, be sure to put the cut corner as indicated on the
picture.
Close the battery door
4.3.2 MicroSD Memory Card
WARNING
Switch off the terminal before opening the battery door.
MicroSD connector is located inside the terminal, in a closed
compartment.
Turn the terminal and remove the battery door.
MicroSD are identified by the engraved marks on the lower
housing.
When introducing a MicroSD in its slot, be sure to put the cut
corner as indicated on the picture.
Close the battery door.
NOTE: The terminal supports SDHC MicroSD cards up to 32GB.
AXIUM EX6000
11/17
14
Banks and Acquirers International Holding SAS
Copyright© 2022Ingenico–
All rights reserved
Advertisement
Table of Contents
