Table of Contents
Advertisement
18 Returning a system.
Before returning a system to Halo, please ensure that the following preparatory steps are followed. If the system is
being returned due to an internal computer fault, then it is recognised that some of the following steps will not be
possible.
•
The system is cleaned.
•
The IP settings for the RJ45-X connection are set to the default:
IP Address
Subnet mask
Default gateway
•
The Remote access software that the system came with is able to run at startup.
•
Any passwords needed to access the system are either removed or are sent to Halo prior to sending
the system.
•
The system is packed in the same way that it was received. The
reference. The legs need to be adjusted to the correct height for travel.
•
The system's UPS box will not be needed.
[Back to contents]
192.168.0.1
255.255.255.0
192.168.0.1
Unpacking
section can be used for
Advertisement
Table of Contents
