Table of Contents
Advertisement
6 Orientation and levelling.
When the main control software is started, a pitch and roll value will be displayed, and there will be time to level the
system during the setup period.
•
An adjustment knob at the top of each leg will extend and retract a telescopic sub-leg to vary the overall leg
length. Adjust the legs in pairs – one end or one side at a time.
•
Turn the adjustment knobs clock wise (looking from above) to retract the leg, and counter-clock wise to
extend.
•
The pitch and roll sensor has a resolution of 0.1 degrees.
A negative roll number will be displayed
A negative pitch number will be displayed
[Back to contents]
All Lidar scan positioning and calculated results will assume
that it is aligned to north as shown. Use the side of the
enclosure, and not the label for reference.
N
A positive roll number will be displayed
A positive pitch number will be displayed
Advertisement
Table of Contents
