Table of Contents
Advertisement
When UDP data broadcasting is enabled, some data fields will be broadcast to a remote IP and Port. A valid LAN or
Internet connection is needed for this function, although the loss of connection won't adversely affect the system as
the UDP method of broadcasting is insensitive to network problems. For example, the network cable can be removed
during broadcasting, and the system will be unaffected. See
The following window will be displayed when the button position changes from the OFF position to the ON position
during system setup.
After the required settings have been selected, and the Accept settings button has been pressed, the current
settings will be saved and become the new default values that the system will use for the next start up.
this section
Choose an appropriate IP address and port to broadcast the
data to, and the fields to be broadcast. Note that raw data is
too large to send using UDP, and there could be data loss for
processed data taken to long range when gate overlapping is
enabled. It will depend to some extent on the speed and
quality of the network connection.
Press the Finished button to save the settings and close the
window.
for more information.
Advertisement
Table of Contents
