Table of Contents
Advertisement
If the remote PC is physically switched off, or is having a problem connecting to the LAN, then the following message
will be displayed after the 'Connect' button is pressed:
If connection is problematic, check that your attached PC is using the correct network settings and that the correct RJ
connection and leads are being used. If the problem persists, follow this procedure:
The first time that a connection is made, the following screen is displayed.
Choose the 'View screen' option to view the desktop display of the Lidar PC. The software allows for file transfer
across the connection, as well as an option to view only.
Choose the network connections, choose the
fixed IP connection number (double click), then
choose the support tab. If it's stuck on
acquiring address or is having problems, click
the 'Repair' button. It should then assign the
192.168.0.2 IP address.
Advertisement
Table of Contents
