G1 Spectacle Kit - MSA G1 Operating Manual

11 G1 Spectacle Kit

11 G1 Spectacle Kit
WARNING!
Before using a spectacle kit, an optometrist must examine the spectacle kit and prescribe the correct lenses to fit into the lens
frame on the spectacle kit.
Failure to follow this warning can result in serious personal injury or death.
1. Turn the head harness over the front of the facepiece so the harness covers the
lens of the facepiece.
This will open up the faceblank to make it easier to install the spectacle kit.
2. Squeeze in on the wire frame of the spectacle kit at the large bends about 2 in. (5
cm) from the ends.
3. Push the top part of the wire frame into the lens of the facepiece.
The faceblank has three rubber tabs made to grab the wire frame.
G1 APR Facepiece
US
32