System Overview - Bosch DIVAR IP all-in-one 6000 Installation Manual

Hide thumbs Also See for DIVAR IP all-in-one 6000:
Table of Contents

Advertisement

DIVAR IP all-in-one 6000
3

System overview

DIVAR IP all-in-one 6000 is an easy to use all-in-one recording, viewing, and management
solution for network surveillance systems.
Running the full BVMS solution and powered by Bosch Video Recording Manager (VRM)
including the Bosch Video Streaming Gateway (VSG) to integrate 3rd party cameras, DIVAR IP
all-in-one 6000 is an intelligent IP storage device that eliminates the need for separate
Network Video Recorder (NVR) server and storage hardware.
BVMS manages all IP and digital video and audio, plus all the security data being transmitted
across your IP network. It seamlessly combines IP cameras and encoders, provides system-
wide event and alarm management, system health monitoring, user and priority management.
DIVAR IP all-in-one 6000 is based on the operating system Microsoft Windows Server IoT 2022
for Storage Workgroup.
DIVAR IP System Manager is the central user interface that offers an easy system setup,
configuration and software upgrade.
Device components
Component
Hard drives
Power supply
Mounting rails
Control panel
I/O ports
Bosch Security Systems B.V.
Description
The device has four hard drive bays for SATA hard drives.
The hard drives are hot swappable. Once setup correctly, the drives can
be removed without turning off the system.
Note: For empty units, the hard drives must be purchased separately. For
the latest shipping lists, see the datasheet in the online product catalog.
The device has a 350 W power supply.
The device is delivered with pre-installed inner rails. The inner rails do
not interfere with normal use of the device if you decide not to install it
in a rack.
To install the device in a rack, you need the inner rail extensions and the
outer rails that are included in the rack mount kit. For a rack installation,
follow the installation instructions in this manual.
The control panel is located on the front and has power buttons and
status monitoring LEDs.
On the rear, there are various I/O ports to connect the device to the
network and to other devices.
Installation manual
System overview | en
2022-10 | V02 | F.01U.407.903
15

Advertisement

Table of Contents
loading

Table of Contents