HP 8340B Manual page 180

Chapter 5.
Running the Software
INTRODUCTION
This chapter provides information on the system setup, and how
to initially load
and
run
the test
software.
Also provided
is
a
description
of the
8340 FAMILY TEST SYSTEM
menu.
SYSTEM SETUP
Figure
5-1
shows
the
system setup required
to run the test software. Because the computer and disc
drive
are required
to run the software, they are not repeated in the test
equipment
lists for the
individual
tests and utilities. Because
the printer is
common to
all the tests and
utilities, it,
also,
is
not
repeated.
The
individual tests and utilities
assume that all HP-IB connections are made
to the computer, disc
drive,
DUT
and the test
equipment
with HP-IB. These connections are
not shown
in
the individual
test
setups.
HP 8340A
HP-IB
TEST EQUIPMENT
DEVICE
UNDER TEST
(DUT)
HP-IB
HP 2225A HP 9836A HP
9133H
PRINTER TECHNICAL
COMPUTER
Figure 5-1.
System Setup
DISC DRIVE
Attenuator Calibration and Operation Verification Test Software
Running the Software