Table of Contents
Advertisement
To remove the blade, loosen the screw, check the blade bracket,
and replace all parts if they are worn or damaged.
To sharpen the blade, place it in a clamp and file the sharp edges
evenly, checking the balance of the blade.
When reassembling the blade, make sure that the cutting edges are
in the same direction as the direction of rotation of the motor. The
tightening torque of the blade screw should be 3.7 kg * m / s 2 (37
Nm) and can be checked with a torque wrench.
f. Adjust the carburettor
The carburettor has been factory set for optimum performance. If
adjustments are necessary, have them performed by a specialist.
7. STORAGE
a. General storage tips
- Clean the appliance before cleaning.
- Let the engine cool down before store the unit in a closed room.
- Use suitable and authorized containers to conserve fuel.
- Store the device in a dry place away from dust and out of the reach
of children.
- To save storage space, you can fold down the upper handlebar.
Loosen the quick release lever and fold down the handlebar so that
the unit takes up less space. The control cables should not be stuck.
- Do not wrap the device in nylon bags as moisture and mould could
appear.
b. Storage and storage for long periods without use
Failure to follow the storage instructions may lead to start-up
problems due to gasoline residues in the carburettor or permanent
damage.
20
Advertisement
Table of Contents
