Enfora Enabler II-G Integration Manual page 66

Integration Guide
Version 1.01
OEM Responsibilities for All Products Containing the Enabler II-G
In addition to any other regulatory requirements, OEMs and integrators must include or provide the following
information, instructions, warnings and labels with any device or product into which the Enfora Enabler II-G
PCS-1900 GSM transceiver has been incorporated:
Information Description
Detailed Operating
The OEM must provide an operating/installation manual with the final product which
Instructions for clearly indicates that these operating conditions and restrictions must be observed
ensuring compliance at all times to ensure compliance with current FCC guidelines which limit human
with current FCC exposure to radio frequency radiation.
guidelines which limit 20 cm (7.87 inch) separation distance between the antenna and all persons must be
human exposure to maintained at all times for all fixed and mobile products and applications
radio frequency Portable devices and applications are prohibited unless such devices and products
radiation are specifically authorized by the FCC
Maximum antenna gain is limited to 3 dBi* in mobile products and applications
Maximum antenna gain is limited to 7 dBi* in fixed products and applications.
Modifications and/or additions to the Enfora Enabler II-G GSM transceiver, including
use of antennas with higher gain than those authorized by the FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator
Attach the following warning label directly to
Antenna Avoidance
or displayed next to the antenna.
Label Furthermore, this label must be visible to
and easily readable by all persons in the
immediate vicinity of the antenna
Human Exposure Include the following statement in the
Compliance instruction / operation manual.
Statement
GSM0108PB001
To comply with FCC RF exposure
distance of 20 cm (7.87") or more
must be maintained between this
Enfora certifies that the Enfora
Enabler II-G ™ MHz GSM Radio
Module (FCC ID: MIVGSM0108)
complies with the RF hazard
requirements applicable to
broadband PCS equipment
operating under the authority of 47
CFR Part 24, Subpart
E of the FCC Rules and Regulations.
This certification is contingent upon
installation, operation and use of the
Enfora Enabler II-G and its host
product in accordance with all
instructions provided to both the
OEM and end used. When installed
and operated in a manner consistent
with the instructions provided, the
Enfora Enabler II-G meets the
maximum permissible exposure
(MPE) limits for general population /
uncontrolled exposure at defined in
Section 1.1310 of the FCC Rules
and Regulations.
Page 65
WARNING
requirements, a separation
antenna and all persons
1.01 – 01/21/05