Figure 4 Enabler Ii-G Package Dimensions (With Integrated Sim Carrier) - Enfora Enabler II-G Integration Manual

Integration Guide
Version 1.01

Figure 4 Enabler II-G Package Dimensions (with integrated SIM carrier)

•
Use 46.3 X 30.2 X 3.1 as overall module dimension
•
Mated 60-pin I/O connector stack height is 2.0 MM
•
If mounting screw is used, a nylon washer is recommended at board interface. A maximum diameter of
4.00 should be used for all fastening hardware.
•
Antenna direct connect solder pad is 1.02 mm wide X 2.54 mm high.
•
Antenna ground pads are 2.03 mm wide X 2.54 mm high.
GSM0108PB001 Page 21 1.01 – 01/21/05