Figure 20 Remote Sim Interface - Enfora Enabler II-G Integration Manual

Integration Guide
Version 1.01
6.9.2 Using a Remote SIM with the Enfora Enabler II-G Module
The Enabler II-G default configuration does not include an on-board SIM carrier. If the module is going to be
integrated using a remote SIM, the following guidelines are provided:
•
To utilize a remote SIM, the integrator must provide a suitable SIM connector on the Application.
•
The maximum distance from the Enabler II-G to the remote SIM connector must not exceed 25.4
cm (10 inches).
Remote SIM Power
V
DD
I
DD
Remote SIM Line Description
SIM_VDD Remote SIM power supply
SIM_RST Remote SIM reset
SIM_CLK
Remote SIM clock
SIM_I/O
Remote SIM serial data interface
Enabler II-G
SIM
Interface
Figure 19 Remote SIM Interface
•
ESD Protection
•
15 kV Air Discharge
• 8 kV Contact Discharge
6.9.2.1 Remote SIM Component Information
A SIM carrier compatible for use on the Enabler II-G is a JAE Plug-In SIM Card carrier with hinge; JAE
part number SF7W006S1BE1000
GSM0108PB001
Parameter/Conditions
Remote SIM Supply Voltage
3 V Mode
Remote SIM Supply Current –
3V Modes
<25.4 cm (10 in)
SIM_VDD
SIM_RST
SIM_CLK
SIM_I/O
. JAE Plug-in SIM Card with hinge cover SF7 Series
Page 41
MIN TYP MAX
2.7 3.3
10
Remote SIM
1.01 – 01/21/05
UNIT
Vdc
mA
.