Enfora Modem Control Library Architecture; Table 3 - Modem Library Configurations; Figure 22 Library Layout - Enfora Enabler II-G Integration Manual

Integration Guide
Version 1.01

9.5 Enfora Modem Control Library Architecture

The following information provides an overview of the Enfora Modem Control Library architecture. Full
details are provided in the Enfora GSM-GPRS Family Modem Control Library Reference
GSM0000PB006MAN.
Figure 21 provides the general embedded architecture for the Enabler II-G modem. There are various levels
of access provided to allow complete application design flexibility. SLIP access is not currently available.
GPRS Parameters Table
UDP SLIP Port Library
COM Port Library
Figure 21 Library Layout
The table below can be used to help decide which library configuration is the best for a project. SLIP
access is not currently available.
Allows dynamic IP assignment
Allows multiple application to
access the modem
Allow AT Commands
Allows modem control
message
Provide modem control
message formatting
Provides modem parameters
database service
Suitable for microcontroller
programming
Requires TCP/IP stack
Memory usage

Table 3 - Modem Library Configurations

GSM0108PB001
UDP Modem Library
UDP Messaging Library
UDP PPP Port Library UDP Socket Port Library
Benefits
Requirements
Low Low
Page 49
Low Low Low Low
Modem libraries
Messaging
libraries
Port libraries
High High High
1.01 – 01/21/05