Calling The System - 2gig Technologies Vario Quick User Manual

Calling the System

1. Dial the number of the premises.
If the premises has an answering machine, let the line ring once, hang up, and call again.
If the premises does not have an answering machine, wait until the system picks up the call (you will hear a continuous tone).
2. After the tones, enter the two-digit remote access code.
3. Enter your user code and press #.
4. Choose one of the following options from the Operations menu:
8
Acknowledgment
Option
Arm all partitions
Arm by partition 1 > 9 > Partition Number
Disarm all partitions
Disarm by partition 2 > 9 > Partition Number
Change zone bypass 3 > Zone Number > # > 9
Operate utility outputs 4 > Utility Output Number
Change Follow Me 5 > Follow Me Number > # > 2
numbers > New Phone Number > # > 1
Listen in
Talk
Listen and talk
Record messages
Exit the system
Repeat the
Operations menu
Return to the
previous menu
Input
1 > 1
2 > 2
6 > 1
6 > 2
6 > 3
7
0
#
*
Copyright © 2016 Nortek Security & Control LLC
2GIG Vario Quick User Guide