Pro-Form HYBRID TRAINER User Manual page 13

13. While a second person holds the Console (16)
near the Console Post (73), plug the Upper Wire
(105) and the Pulse Wires (68) into the recep-
tacles on the Console.
The connectors on the Upper Wire (105) and
the Pulse Wires (68) should slide easily into
the receptacles and snap into place. If a con-
nector does not slide easily into a receptacle,
turn the connector and try again. If you do not
connect the connectors properly, the console
may become damaged when you use the
hybrid trainer.
Insert the excess wire into the Console Post (73)
or into the Console (16).
Tip: Avoid pinching the wires. Attach the
Console (16) to the Console Post (73) with four
M4 x 16mm Screws (47).
14. Attach the Water Bottle Holder (27) to the Front
Frame (23) with two M4 x 16mm Screws (47).
13
16
Avoid pinching
the wires
14
47
13
105
73
68
27
23
47