Pro-Form HYBRID TRAINER User Manual page 12

11. Slide the Right Pedal Leg (71) onto the Right
Pedal Leg Bracket (75).
Attach the Right Pedal Leg (71) with three
M8 x 13mm Screws (95) and three M8 Split
Washers (42). Start all three Screws, and then
tighten them.
Repeat this step on the other side of the
hybrid trainer.
12. Have a second person hold the Handlebar (53)
near the Console Post (73).
Insert the indicated wire tie into the hole in the
side of the Console Post (73), and then pull the
wire tie until the Pulse Wires (68) are routed
through the Console Post.
Tip: Avoid pinching the wires. Attach the
Handlebar (53) to the Console Post (73) with two
M8 x 65mm Bolts (94), two M8 Split Washers
(42), and two M8 Locknuts (10).
11
75
12
105
10
73
12
71
42
95
53
94
42
68
Wire
Tie
Avoid pinching
the wires