Pro-Form HYBRID TRAINER User Manual page 15

17. Attach the Left and Right Seat Brackets (14, 15)
to the Rear Frame (1) with two M8 x 125mm
Bolts (58), four M8 Small Washers (93), and two
M8 Locknuts (10).
18. IMPORTANT: If you purchased the optional
iFit module, insert the iFit module into the iFit
port on the Console (16) before you attach
the Tablet Holder (101). After the hybrid
trainer is assembled, follow the instructions
included with the iFit module.
Attach the Tablet Holder (101) to the Console
(16) with four #8 x 12mm Screws (102); start all
the Screws, and then tighten them.
17
10
93
14
18
iFit Port
16
15
15
1
101
102
93
58