Changing The Basic Ip Settings Options - NETGEAR WAG102 Reference Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
5. Click Apply to save your settings.

Changing the Basic IP Settings Options

The Basic IP Settings menu is under the Basic heading of the main menu. Use this menu to
configure DHCP, static IP, and access point name settings.
Figure 3-16
• Access Point Name (NetBIOS)
Enter a new name for the wireless access point and click Apply to save your changes.
• The IP Address
The wireless access point is shipped preconfigured with its DHCP client disabled and with the
following private static IP addresses:
– IP Address — 192.168.0.232
– IP Subnet Mask — 255.255.255.0
– Gateway — 0.0.0.0
Basic Installation and Configuration
v1.0, September 2005
3-31