How To Configure Wep - NETGEAR WAG102 Reference Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
3. The optional Access Control window lets you block the network access privilege of the
specified stations through the WAG102 Access Point. When you enable access control, the
access point only accepts connections from clients on the selected access control list. This
provides an additional layer of security.
a. Choose the Turn Access Control On to enable Access Control feature.
b. Select the desired Access Control Database options. The options are:
• Local MAC Address Database – The Access Point will use the local MAC address
table for Access Control. This is the default.
• RADIUS MAC Address Database – The Access Point will use the MAC address table
located on the external Radius server on the LAN for Access Control.
c. Trusted Wireless Stations: This lists any wireless stations you have entered. If you have
not entered any wireless stations this list will be empty. To delete an existing entry, select
it and then click the "Delete" button.
d. Available Wireless Stations: Select the stations from the wireless station list and click
Add button to add to the Trusted Wireless Stations list.
e. Add new Station Manually: Use this to add the MAC address of the wireless stations to
the Trusted Wireless Stations list.
Now, only devices on this list will be allowed to wirelessly connect to the WAG102.

How to Configure WEP

To configure WEP data encryption, follow these steps:
1. Log in to the WAG102 using its default address of
address the unit is currently configured Use the default user name of admin and default
password of password, or whatever LAN address and password you have set up.
2. Click the WEP/WPA Settings link in the main menu of the WAG102.
Basic Installation and Configuration
http://192.168.0.232
v1.0, September 2005
or at whatever IP
3-25