Rear Panel - NETGEAR WAG102 Reference Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
LED DESCRIPTION
802.11a WLAN Wireless LAN Link Activity Indicator (5 GHz)
Off Indicates no wireless link activity.
Green Blink Wireless link activity.
802.11g WLAN Wireless LAN Link Activity Indicator (2.4 GHz)
Off Indicates no wireless link activity.
Green Blink Wireless link activity.

Rear Panel

Figure 2-2
• Left and Right Detachable Antenna
The WAG102 provides two detachable antennas (2.4 GHz and 5 GHz).
• Restore to Factory Defaults Button
The restore to default button located between the Ethernet RJ-45 connector and the power
socket restores the WAG102 to the factory default settings.
• RJ-45 Ethernet Port
Use the WAG102 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as
a hub, switch, router, or POE switch.
• Power Socket
This socket connects to the WAG102 12V 1 A power adapter.
Introduction
v1.0, September 2005
2-7