Management; Remote Management - NETGEAR WAG102 Reference Manual

This chapter describes how to use the management features of your WAG102 ProSafe Dual Band
Wireless Access Point. These features can be found by clicking on the Maintenance heading in the
Main Menu of the browser interface.

Remote Management

The Remote Management screen lets you specify the simple network management protocol
(SNMP) parameters.
Figure 4-1
Fill out the remote management information:
• SNMP
– Enable SNMP to allow the SNMP network management software, such as HP OpenView,
to manage the wireless access point via SNMPv1/v2 protocol.
– Public Community Name: The community string to allow the SNMP manager to read the
wireless access point's MIB objects. The default is public.
– Private Community Name: The community string to allow the SNMP manager to read
and write the wireless access point's MIB objects. The default is private.

Management

v1.0, September 2005
Chapter 4
Management
4-1