NETGEAR WAG102 Reference Manual page 50

Prosafe dual band wireless access point

Hide thumbs Also See for WAG102:

Table of Contents

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102

3. Authentication/Access Control Radius Server Configuration: This configuration is

required for authentication using Radius. IP Address, Port No. and Shared Secret is required

for communication with a Radius Server. A Secondary Radius Server for use if the Primary

Radius Server fails.

•

IP Address: The IP address of the Radius Server. The default is 0.0.0.0

•

Port Number: Port number of the Radius Server. The default is 1812.

•

Shared Secret: This is shared between the Wireless Access Point and the Radius Server

while authenticating the supplicant.

4. Accounting Radius Server Configuration: This configuration is required for accounting

using a Radius Server. IP Address, Port No. and Shared Secret is required for communication

with the Radius Server. A Secondary Radius Server can be configured for use if the Primary

Radius Server fails.

•

IP Address: The IP address of the Radius Server. The default is 0.0.0.0

•

Port Number: Port number of the Radius Server. The default is 1813.

•

Shared Secret: This is shared between the Wireless Access Point and the Radius Server

while authenticating the supplicant.

5. Click Apply to save your settings.

3-28

v1.0, September 2005

Basic Installation and Configuration

Table of Contents