Appendix C
Connector Pin Assignments
This appendix provides information on the RJ-45, AUI, and BNC connectors that are used for the
NETGEAR Model EN516 Ethernet Hub.
RJ-45 Connector
The RJ-45 connector is used to connect workstations, hubs, and switches through unshielded
twisted pair cable. The RJ-45 connector accepts four-pair Category 3 or Category 5 UTP cable.
Only two pairs are used for 10BASE-T wiring. Figure C-1 illustrates the RJ-45 connector.
1
8
7177
Figure C-1.
RJ-45 connector
Connector Pin Assignments
C-1