Table of Contents
Advertisement
Appendix B
Connector Pin Assignments
This appendix provides information on the RJ-45 plug and the vista RJ-45 connector that is used
for the NETGEAR Model FS508 Fast Ethernet Switch.
RJ-45 Plug and vista RJ-45 Connector
In a Fast Ethernet network, it is important that all 100BASE-T certified Category 5 cabling use
RJ-45 plugs. The RJ-45 plug accepts 4-pair unshielded twisted pair (UTP) or shielded twisted
pair (STP) 100
cable and connects into the vista RJ-45 connector.
The vista RJ-45 connector (also referred to as a 10/100 Mbps port) is used to connect stations,
hubs, and switches through UTP cable and supports 100 Mbps data transmission.
The RJ-45 plug and vista RJ-45 connector are both illustrated in
Figure
5-1.
12345678
8
1
711EA
Key:
1 to 8 = Pin numbers
Figure 5-1.
RJ-45 plug and vista RJ-45 connector with built-in LEDs
Connector Pin Assignments
B-1
Advertisement
Table of Contents
