Connector Pin Assignments; Rj-45 Plug And Vista Rj-45 Connector; Figure B-1. Rj-45 Plug And Vista Rj-45 Connector With Built-In Leds - NETGEAR GS504T Installation Manual

GS504T.Manual.FINAL 6/2/00 12:49 PM Page 23
APPENDIX B: CONNECTOR PIN ASSIGNMENTS
This appendix provides information about the RJ-45 plug and the RJ-45 connector
used for the NETGEAR Model GS504T Copper Gigabit Switch.

RJ-45 Plug and Vista RJ-45 Connector

In a Fast Ethernet network, it is important that all 100BASE-T certified Category 5
cabling use RJ-45 plugs.The RJ-45 plug accepts 4-pair UTP or shielded twisted
pair (STP) 100 ohm cable and connects into the vista RJ-45 connector.
The vista RJ-45 connector is used to connect stations, hubs, and switches through
UTP cable; it supports 10 Mbps, 100 Mbps, or 1000 Mbps data transmission.
The RJ-45 plug and vista RJ-45 connector are both illustrated in Figure B-1.
12345678
8 1
711EA
Key:
1 to 8 = pin numbers

Figure B-1. RJ-45 Plug and Vista RJ-45 Connector with Built-in LEDs

connector pin assignments

B-1