Rear Panel; Figure 2-2. Rear Panel Of The Model En516 Hub - NETGEAR EN516 Installation Manual

Installation Guide for the Model EN516 Ethernet Hub

Rear Panel

The rear panel of the Model EN516 hub (refer to Figure 2-2) provides two ports, the AUI port and
the BNC port. You can use the AUI port with the appropriate transceiver to connect the hub to a
backbone network using thin coaxial cable, thick coaxial cable, fiber optic cable, or 10BASE-T
wiring. You can use the BNC port to connect to a backbone network or other PCs using thin
coaxial cable. The rear panel also includes an AC power receptacle. The hub accepts between 100
and 240 V AC, 50/60 Hz.
1
AUI
Key:
1 = AUI port
2 = BNC port
3 = AC power receptacle
Figure 2-2. Rear panel of the Model EN516 hub
2-4
2
BNC
3
100-240 VAC 50-60 Hz 0.15A
7147
Physical Description