Table of Contents
Advertisement
Installation Guide for the Model EN516 Ethernet Hub
Network Interface Cards
Make sure the network interface cards installed in the workstations are in working condition.
Configuration
If problems occur after altering the network configuration, restore the original connections and
determine the problem by implementing the new changes, one procedure at a time. Ensure that
cable distances, repeater limits, and other physical aspects of the installation do not exceed the
recommendations.
Hub Integrity
If required, verify the integrity of the hub by resetting it. Turn off the power to the switch and then
turn the power to the switch back on. If the problem continues and you have completed all the
preceding diagnoses, contact Customer Support. See page iii for the phone number of Customer
Support in your area.
4-4
Troubleshooting
Advertisement
Table of Contents
