Wireless Communication Options - Viking H-10 Installation Instructions And Safety Information

Wireless Communication Options

REQUIRED ADD-ON:
Viking Konnect - Wireless Primary/Secondary Kit PART# VA-KONNECT-MS
! Technical Tip:
DO NOT set the "Timer" and/or "Overlap" features on both operators
Control Boards. Only turn these features on at the Primary Control Board.
Step 1
Plug the modules on to the "V.K" plug & play
connection of each operators Control Board. It is not
important which board the Primary or Secondary
module is placed on.
Step 2
At the Primary Operator:
Connect the entrapment protection sensor(s) as
described on pages 7 and 18.
Step 3
At the Secondary Operator:
Turn ON the DUAL MODE Feature:
• Toggle the "Diagnose" button until you see
on the LCD Display.
• Default setting is OFF.
• Press and hold the "Stop" button.
• Toggle the "Diagnose" button once.
• The feature should now be displayed as ON.
VIKING TECHNICAL SUPPORT 1.800.908.0884
PRIMARY/SECONDARY SETUP
Green LEDs will be illuminated
solid when communication is ON.
DUAL MODE
DUAL MODE
ON
2 1